PD3-5024-4-EI

  • Standard Product
  • Discontinued Product

Not available from Aug/31/2016."
The recommended alternative model is PD3-5024-4-EI(A).

This Digital Control Unit can be used for LED Light Units with an input voltage of 24 V within a total power consumption of 46 W.
Connection with the HLV2-series Spot Lights is also available.
This Control Unit operates on a 100 to 240 VAC input and measures 197 x 82.6 x 120 mm (width x depth x height). External control through Ethernet communications.""

Note: Select a model after making sure that the total power consumption of the Light Units is within the output power capacity of the Control Unit.

Product Details

Dimensions W 197 mm x D 82.6 mm x H 120 mm
Applicable Light Unit (output ratings) 24V LIGHT connectors: Lights with 24-VDC input,
HLV LIGHT connectors: HLV2/HLV-series Spot Lights,
Total for 4 channels: 46W
Number of channels 4 channels
Lighting method Constant/Strobe lighting
Drive method 24V LIGHT connectors: Constant-voltage system,
HLV LIGHT connectors: Constant-current system
Intensity control method 24V LIGHT connectors: PWM control and lighting time control,
HLV LIGHT connectors: Variable-current control
Intensity control Use of the setting switch on the front panel (256 steps)
PWM frequency 125kHz
Frequency 50/60 Hz
Output voltage 24VDC
Output current Total for 4 channels: 1.91 A
Inrush current 15 A (at 100 VAC), 30 A (at 200 VAC) from a cold start
Error detection display Digital display on the front-panel;
OCP: Overcurrent error, EFN: Fan Stop Error,
and EID: ID error (HLV2/HLV-series Spot Lights only)
Error detection output Command sent when overcurrent output is detected.
Over current protection Yes
Output connector SMP-03V-BC x 8 pieces
External control connector Trigger input: MIL connector (MIL-C-83503 compliant), 10 pins
For setting the light intensity/mode: RJ-45
Conformed standards CE, RoHS
Operating temperature and humidity Temperature: 0 to 40°C, Humidity: 20 to 85%RH (no condensation)
Storage temperature and humidity Temperature: -20 to 60°C, Humidity: 20 to 85%RH (no condensation)
Cooling method Forced cooling
Weight 1200 g
Material Aluminium, ABS
Accessories 2m long 3-prong AC power cord with ground terminal x 1, Instruction Guide x 1, Brackets for the PD3-series Control Unit (BK-PD3) x 1 (including 2 brackets)

Dimensions (mm)

* Click to enlarge image.

Cables

  • EXCB2-M10-3

Downloads

General Catalog PDF Drawing DXF Drawing User Manual 3D-CAD

Products