HOME > Products Information > Control Units > Digital Control Units > PD3 Series > PD3-10024-8-SI(A)

PD3-10024-8-SI(A)

  • Standard Product

This Digital Control Unit can be used for LED Light Units with an input voltage of 24 V within a total power consumption of 95 W.
Connection with the HLV3/HLV2-series Spot Lights is also available.
This Control Unit operates on a 100 to 240 VAC input and measures 220 x 82.6 x 120 mm (width x depth x height). External control through EIA-485 communications.

Product Details

Dimensions W 220 mm x D 82.6 mm x H 120 mm
Applicable Light Unit (output ratings) Light Units with 24 VDC input, HLV3/HLV2 series (Spot Light)
Total for 8 channels: 95 W (EL connector: one 95 W connector)
Number of channels 8 channels
Lighting method Constant/Strobe lighting
Drive method 24V LIGHT connectors: Constant-voltage system,
HLV LIGHT connectors: Constant-current system
Intensity control method 24V LIGHT connectors: PWM control and lighting time control,
HLV LIGHT connectors: Variable-current control
Intensity control Manual: 256-step using the front setting switch
External: Command input via EIA-485 communication
PWM frequency 125kHz
Input voltage 100 to 240 VAC (+10% -15%)
Frequency 50/60 Hz
Power consumption 130 VA
Output voltage 24VDC
Output current 1.4 A (2 channels total)
Inrush current 15 A (at 100 VAC), 30 A (at 200 VAC) from a cold start
Error detection display Digital display on the front-panel;
OCP: Overcurrent error, EFN: Fan Stop Error,
and EID: ID error (HLV3/HLV2-series Spot Lights only)
Error detection output Command sent when overcurrent output is detected.
Over current protection Yes
Output connector SMP-03V-BC x 16, ELR-02V x 1
External control connector Trigger input: MIL connector (MIL-C-83503 compliant), 10 pins
For setting the light intensity/mode: e-CON connector, 3 pins
Conformed standards CE, UKCA、RoHS
Operating temperature and humidity Temperature: 0 to 40°C, Humidity: 20 to 85%RH (no condensation)
Storage temperature and humidity Temperature: -20 to 60°C, Humidity: 20 to 85%RH (no condensation)
Cooling method Forced cooling
Weight 1,500 g max.
Material Aluminium, ABS
Accessories 2m long 3-pin power cord with ground terminal x1
Base Brackets x1 set
Instruction Guide x1
Program [Sample Program]
Sample programs are available. See the Software Tools tab.

Dimensions (mm)

* Click to enlarge image.

Software Tools

  • シーシーエス電源用サンプルプログラム Sample Program for CCS Controllers

Cables

  • ECNR-E3CN4

  • EXCB2-E3-3

  • EXCB2-E3-E3-0.2

  • EXCB2-M10-3

Downloads

General Catalog PDF Drawing DXF Drawing User Manual Warranty & Environmental Info 3D-CAD

Products