HOME > Products Information > Control Units > Digital Control Units > PD3 Series > PD3-5024-3-ET

PD3-5024-3-ET

  • Standard Product
  • Discontinued Product

Not available from Aug/31/2016."
The recommended alternative model is PD3-5024-3-ET(A).

This Digital Control Unit can be used for LED Light Units with an input voltage of 24 V within a total power consumption of 48 W.
It operates with 24 VDC input. It measures 84 x 82.6 x 120 mm (width x depth x height). External control through Ethernet communications.""

Note: Select a model after making sure that the total power consumption of the Light Units is within the output power capacity of the Control Unit.

Product Details

Dimensions W 84 mm x D 82.6 mm x H 120 mm
Applicable Light Unit (output ratings) 24 V/48 W
Number of channels 3 channels
Lighting method Constant/Strobe lighting
Drive method Constant-voltage system
Intensity control method PWM control, Lighting time control
Intensity control Use of the setting switch on the front panel (256 steps)
PWM frequency 125kHz
Output current Total for 3 channels: 2A
Error detection display OCP is displayed on the digital display
Error detection output Command sent when overcurrent output is detected.
Over current protection Yes
Output connector SMP-03V-BC x 3 pieces
External control connector Trigger input: MIL connector (MIL-C-83503 compliant), 10 pins
For setting the light intensity/mode: RJ-45
Conformed standards CE, RoHS
Operating temperature and humidity Temperature: 0 to 40°C, Humidity: 20 to 85%RH (no condensation)
Storage temperature and humidity Temperature: -20 to 60°C, Humidity: 20 to 85%RH (no condensation)
Cooling method Natural air cooling
Weight 400 g
Material Aluminium, ABS
Accessories Instruction Guide x 1

Dimensions (mm)

* Click to enlarge image.

Cables

  • EXCB2-M10-3

Downloads

General Catalog PDF Drawing DXF Drawing User Manual 3D-CAD

Products